Blogs

Air conditioner maintenance offerings

System rejuvenation

$315

  1. Infrared Inspection of Heat Exchanger
  2. Pre-Check Temperature Differential
  3. Inspect Combustion Venting
  4. Clean and Test Blower Motor
  5. Chemically Clean Blower Wheel
  6. Measure Microfarads of Capacitor
  7. Inspect Wiring & Connections
  8. Measure Airflow and Static Pressure
  9. Evaluate Evaporator Coil Condition
  10. Clean Condensate Drain System
  11. Measure Filtration Performance
  12. Test Visible Gas Line for Leaks
  13. Inspection of Ductwork Cleanliness
  14. Clean Blower Cabinet of Furnace
  15. Test Breaker & Emergency Disconnect
  16. Replace Thermostat Batteries
  17. Measure Relative Humidity of Home
  18. Inspect Refrigerant Line Insulation
  19. Inspect and Seal AC Wall Penetrations
  20. Verify System Efficiency & Performance
  21. Calibrate & Adjust Refrigerant Charge
  22. Add Up To 2 Pounds of Approved Refrigerant
  23. Test for Refrigerant Restrictions & Contamination
  24. Chemically Clean & Treat Outdoor Condensing Coils
  25. Clean Interior Cabinet of Outdoor Unit
  26. Measure Outdoor Fan Amperage
  27. Measure Compressor Amperage
  28. Measure Compressor & Fan Capacitor
  29. Test All Safety Switch Operation
  30. Post-Check Proper System Operation

Tune Up

$149

  1. Infrared Inspection of Heat Exchanger
  2. Pre-Check Temperature Differential
  3. Inspect Combustion Venting
  4. Clean & Test Blower Motor
  5. Measure Microfarads of Capacitor
  6. Inspect Wiring & Connections
  7. Measure Airflow and Static Pressure
  8. Evaluate Evaporator Coil Condition
  9. Clean Condensate Drain System
  10. Measure Filtration Performance
  11. Test Visible Gas Line for Leaks
  12. Inspection of Ductwork Cleanliness
  13. Clean Blower Cabinet of Furnace
  14. Test Breaker & Emergency Disconnect
  15. Measure Relative Humidity of Home
  16. Inspect Refrigerant Line Insulation
  17. Verify System Efficiency & Performance
  18. Measure Refrigerant Charge
  19. Chemically Clean Outdoor Condensing Coils
  20. Measure Outdoor Fan Amperage
  21. Measure Compressor Amperage
  22. Measure Compressor & Fan Capacitor
  23. Test All Safety Switch Operation
  24. Post-Check Proper System Operation

Safety Inspection

$89

  1. Infrared Inspection of Heat Exchanger
  2. Pre-Check Temperature Differential
  3. Inspect Combustion Venting
  4. Test Blower System Performance
  5. Measure Microfarads of Capacitor
  6. Inspect Wiring & Connections
  7. Evaluate Evaporator Coil Condition
  8. Inspect Condensate Drain System
  9. Test Visible Gas Line for Leaks
  10. Test Breaker & Emergency Disconnect
  11. Inspect Refrigerant Line Insulation
  12. Test & Measure Refrigerant Charge
  13. Inspect Outdoor Condensing Coils
  14. Measure Outdoor Fan Amperage
  15. Measure Compressor Amperage
  16. Measure Compressor & Fan Capacitor
  17. Test All Safety Switch Operation
  18. Post-Check Proper System Operation
Return